Contains:
Zacuto Z-DSLR-B DSLR Baseplate Kit
The DSLR baseplate is our adjustable and expandable baseplate. It comes with a pair
of 3.5" male/female rods in order to mount a follow focus and/or matte box;
rod extensions may be necessary for long lenses. The baseplate mounts to your camera
using a 1/4 20" screw. The baseplate has multiple 1/2" 13 threads on all
sides; (1) 1/2" 13 thread on both the left and right side, (4) 1/2" 13
threads on the front (2 on the top and 2 on the bottom) and (2) 1/2" 13 threads
on the back . The multiple 1/2" 13 threads allow you to mount rods on all sides
of the baseplate allowing you to create your perfect rig. You can mount rods off
the side to make a shoulder mounted rig or to build a cage. The Allen screws in
the front of the baseplate adjust the height of the plate for compatibility with
all DSLR cameras with and without battery grips for use with follow focuses and
matte boxes.
Zacuto Z-FF-1 Z-Focus incl. Zacuto Z-ZG-16 ZipGear Universal
-
Compleatly gear-driven design for slip free, accurate movement
-
worm gear adjustment screw to allow user to tighten gear play
-
Interchangeable drive gears
-
Other drives available in Fuji .6 Canon .5 pitches
-
Magnetic dry erase marking disk
-
Standard accessory port for Zacuto or Chrosziel follow focus whip, speed crank,
etc.
-
Industry-standard 15mm lightweight rod mount
-
lightweight design
Zacuto Z-DSLR-H DSLR Handle
The DSLR Handle is a sturdy versatile handle that mounts onto any 15mm rod system
using our Z-mount Zwivel. It is the perfect solution for low mode shooting, lifting
your rig on and off your shoulder, as well as a quick and easy way to carry your
rig. The handle can swivel and slide so you can position it at the rigs center of
gravity for perfect balance. You can also mount additional accessories onto the
handle rod by using Z-mounts that will enable you to attach anything from a Zamerican
arm, additional 15mm rods, lights and mics. The DSLR Handle is quick releasable
from the rig by the twist of a lever. This is the perfect handle for all DSLR rig
owners.
Zacuto Z-RE-FM2 2-inch Male/Female Rod Extension
Vocas MB-250 DV Wide-Angle Compendium
Includes:
-
2x 4" x 4" filter frame
-
1x standard top flag
-
2x patented eye-brows
The Vocas MB-250 features a Quick-Lock mounting system that attaches directly to
the front lens barrel. If required, an MBS-100 mattebox support and a barsadapter
on standard 15 mm rails can be used. This mattebox accommodates 3x 3" through
4x 6" filters and works with most wide angle lenses in both 4:3 and 16:9 aspect
ratios.
The Vocas MB-250 has one rotatable and one fixed 4" wide filter tray. And also
features a patented "heavy duty" French flag clamper.
Internal eyebrows are standard on the MB-250. They can be operated from the outside
of the mattebox. These patented internal French flags allow the user to adjust the
matte (or mask) to the zoom position of the lens.
Although the MB-250 can be used as a clip-on mattebox, we recommend the use of a
barsadapter and a MBS-100 mattebox support. Weight of mattebox with filter frames:
350 gram.
Vocas DVMB MKII Support
Vocas 0250-0147 step-down Adapter ring
Zacuto Z-UD Universal Donut
More products from
BPM
