ERECA Stage Racer 8HD RX/TX Set
- Freitextfeld 1: ERECA_STAR-8HD-RX+TX
Kontakt & Beratung
Unsere Experten sind für Sie da:
Mo.- Fr. 9 bis 18 Uhr
040 557624-0
Kontaktformular
[email protected]
Anfahrt & Showroom
Bundle consists of:
- 1x ERECA Stage Racer 8HD TX 19" transmitter
- 1x ERECA Stage Racer 8HD RX 19" receiver
Properties:
The Stage Racer product line is an ultra flexible solution to connect a stage to an OB Van. With the ERECA unique feature for on the fly direction configurable HDSDI channels and the numerous commodities signal transmitted along the videos, the stage racer is the product of choice for an affordable fast and easy event deployment.
The equipment assumes transmission of a comprehensive set of signals as follows:
- 8 video 3G-/HD-/SD-SDI signals (direction configurable through built in web server)
- 1 Genlock bidirectional (PAL image / Black burst / Tri-level)
- 16 analog audio for intercom or broadcasting
- 2 Ethernet 10/100/1000Mbs (1 Gigabit trunk with 2 VLANS)
- 4 Data RS 232/422/485
- 8 Contact closures
- 4 AES 3 bidirectional (Riedel panel compatible)
- 1 bidirectional MADI (AES10) Signal (Shared with 2 of the 4 AES connectors)
For flexible setup the mechanical is declined in a 1U rack which fits everywhere and in a very rugged compact die cast aluminum box. This latter enclosure ensures excellent shock/drop protection along with dust and water resistant capacity for all “no fly case” applications. Links can be built between racks, rugged boxes or rack and rugged box.
All the signals are transmitted on 2 singlemode fibers. As an option, an optical cable failover is built inside the modules by adding a second connector. In case of fiber break the equipment automatically select the other cable.
STORA RX can be remote powered through Hybrid cable.
Standard connectors are used for all the signals. HD and PAL video ports are on BNC connectors. The other connectors are RJ45 / D SUB. On the rugged version 4 audio are dispatched on Neutrik XLR. Optical and remote power access is done through a Neutrik OpticalCon DUO or compatible with LEMO™ 3K socket.
Signaling / Web browserEach equipment has a LED display panel for signal presence and alarm display.
An internal web server enables remote management and setup (signal presence report / optical power measurement / Data settings / Configure direction of each HD video signal).
Optical:
- Dynamic range: 7 dB (~ 15 km)
- Connector: NEUTRIK OpticalCon DUO or compatible with LEMO™ 3K (EDW / FXW)
Video SD/HD:
- Number, connector: 8 channel on BNC (Each signal direction configurable)
- Direction setting: Internal Web Server
- Impedance: 75 O
- Standard: SDI, ASI, HD, 3G
- Amplitude:
Input:cable equalization (140 m Belden 1694A for 3G)
Output: 800 mV pp - Return loss: Better than –15 dB for 0 to 1500 Mhz and better than – 10 dB for 1500 to 3000 Mhz
Analog Video / GL:
- Number, connector: 1 Bidirectional, 2 BNC
- Standard: PAL, SECAM, NTSC, Tri-level ( Bi / Tri level auto sense )
- Impedance: 75 O
- Bandwidth: > 5.8 MHz at +/- 0.2 dB
- Differential Gain/ Phase: < 1%, < 1°
- Group delay: < 10 ns
- SNR: > 67 dB (CCIR567)
Analog Audio:
- Number, connector: 16 bidirectional channels
- Rugged box: 4 on XLR / 4 on one SUB D 25 socket; for 1U rack all on SUB D 25
- Impedance:
Input: 10 kO differential (non floating)
Output: 20 O differential (non floating) - Amplitude: +4 dBm nominal (saturation at + 18 dBm)
- Bandwidth: 50 Hz to 15 kHz at +/- 0.5 dB, (20 Hz to 20 kHz at -3 dB)
- Distortion: 0.05% at 1 kHz +18 dBm
- Signal to noise ratio: 90 dB, "A" weighted
Digital audio:
- Number, connector: 4 AES bidirectional (Riedel panel compatible) OR 1 MADI (AES10) + 2 AES bidirectional (Riedel panel compatible)
- Bitrate: Up to 48 kHz AES audio / 125 MBs full bandwith for MADI
- Impedance / Connector: 75 O, BNC
- Setting: Internal Web Server
Data:
- Number, connector: 4 bidirectional channels, 1 RJ 45 socket per channel (2 internal connectors for customer custom)
- Protocols: RS485, RS422, RS232
- Data rate: 0 to 230 kbd/s
- Setting: Internal Web Server
Ethernet:
- Number, connector: 2 channels on VLAN, RJ45 Socket
- Protocols: 10, 100 or 1000 Mb/s, Full or Half-duplex (Auto), MDI or MDI-X (Auto)
GPIO:
- Number, connector: 8 bidirectional GPIO contacts / 6 on D-SUB plus 1 GPIO along each DATA RJ45 connector
- Output: Relay (dry contact). 'Common' – 'Normally Open' terminals for each relay
- Input: Floating on the D-SUB, Input pin grounding on RJ45
Powering:
- Consumption: 20 Watts per side
- Low voltage source: 8 to 16 V DC, XLR 4 pins connector, protected by 5*20 mm standard internal fuse
- Mains source: From 90 to 260 VAC / 47 to 63 Hz Dual supplies in the 1U rack
- Hybrid cable source: From 24 to 48 volts on powered device input / allowing 500m of AWG16 cable
Mechanical:
- Rugged model: Die cast strong aluminum case, size 335*235*111 mm excluding connectors and handles
- Rack model: 1 RU 19" rack, depth 300 mm excluding connectors
- Cooling: Internal fan (case walls acting as heat sink / no dust entry guarantee for the RUGGED)
- Operating temp. range: from -20 to + 60°C (avoiding direct sun exposition)
Signaling / Setup:
- Transmitted signals: 1 LED per signal
- Alarms: 1 LED per technical alarm (Power supply / Temperature / Fiber alarm )
- Remote: All signal presence / alarm are reported trough the web server
- Settings: All settings are done trough the web server