EW-DP ENG Set (Q1-6)

Properties:

The EW-DP ENG Set (Q1-6) is a fully digital, wireless UHF microphone system for video applications with an extra long battery life, a latency of 1.9 ms and a digital plug-on transmitter. The transmitter can be used for up to 12 hours on one battery charge, the receiver for up to 7 hours and the integrated battery management shows the remaining runtime in hours:minutes. The Bluetooth function is used for synchronization and control. The Smart Assist app is also used for control, in addition it is used for monitoring. The receivers can be flexibly and quickly attached magnetically and even stacked. In case of error messages, users:inside receive intelligent notifications with suggested solutions.

• Fully digital wireless UHF microphone system for video applications
• Latency of 1.9 ms
• With a digital plug-on transmitter
• Transmitter can be used up to 12 hours on one battery charge, receiver up to 7 hours
• Integrated battery management displays remaining runtime in hours:minutes
• Bluetooth function is used for synchronization and control
• Smart Assist App is used for control and monitoring
• Receivers can be flexibly and quickly magnetically attached and even stacked
• In the event of error messages, users receive intelligent notifications with suggested solutions

Technical Specifications:

• Transmit power: BLE max. 10 mW EIRP
• Audio output power: < 2 dBV max. (high level) / < 4 dBU max. (high level)
• Headphone output: < 50 mW, 16 Ω

• Bandwidth: 200 kHz
• Transmit power: Audio Link 10 mW ERP (range Y1-3: 12 mW ERP), BLE max. 10 mW EIRP

• Transducer principle: Continuously polarized condenser microphone
• Polar pattern: Omnidirectional
• Free-field open-circuit transmittance (1 kHz): 17 mV/Pa
• Max. Sound pressure level (at 1 kHz): 130 dB
• Frequency response: 50 to 18,000 Hz
• Substitute noise level (A-weighting): 32 dB

• Audio link frequency range: Q1-6 470.2 to 526 MHz (other variants on request)
• Bluetooth Low Energy (BLE) Frequency range: 2402 to 2480 MHz
• Audio frequency response: 20 Hz to 20 kHz (- 3 dB) @ 3 dBfs
• Distortion factor: ≤ -60 dB for 1 kHz @ -3 dBfs input level
• Dynamic range: 134 dB
• System latency: 1.9 ms

Data Links:

• 1x USB-C, power supply
• 1x 3.5 mm jack, headphone jack

• 1x 3.5 mm jack socket, microphone connector

• 1x 3.5 mm jack socket

• 1x 3.5 mm jack socket

Input
• 1x 3-pin XLR

• 1x 3.5 mm jack socket

• 1x MicroSD slot

General Product Information:

• Dimensions EW-DP EK (W x H x D): 86 x 67 x 28 mm
• Weight (without antennas/batteries): approx. 140 g
• Input voltage: ~ 1.8 to 4.35 V
• Input current: Typ. < 250 mA, Max. < 400 mA (BA 70) / Typ. < 400 mA, Max. < 750 mA (2x AA batteries) / < 300 mA @ 5 V (USB-C Standalone)
• Power supply: 2x AA batteries 1.5 V / BA 70 battery pack / USB-C PD (max.): 5 V / 1500 mA, 9 V / 900 mA, 12 V / 700 mA

• Dimensions EW-D SK (W x H x D): 63 x 80 x 20 mm
• Weight: (without batteries): approx. 120 g
• Input voltage: 2.0 to 4.35 V
• Input current: < 300 mA
• Power supply: 2x AA batteries 1.5 V (alkaline-manganese) / BA 70 battery pack

• Cable length: approx. 1.60 m
• Supply voltage: 7.5 V

• Power supply: + 48 V phantom power / 2x AA batteries

• Operating temperature: -10 °C to 55 °C
• Relative humidity: 5 to 95 % (non-condensing)

Scope of Delivery:

• 1x Sennheiser EW-DP EK Digital portable Single Channel Receiver
• 1x Sennheiser EW-D SK Digital Bodypack Transmitter
• 1x Sennheiser ME2 clip-on microphone (omnidirectional)
• 1x Sennheiser EW-DP SKP digital plug-on transmitter
• 1x Mounting kit (mounting plate, camera adapter, belt clip and screws)
• 1x BA 70 lithium-ion battery and two AA batteries
• 1x 3.5 mm blade (TRS) to 3.5 mm jack (TRS) cable (lockable)
• 1x 3.5mm blade (TRS) to XLR cable (lockable)
• 1x USB-C charging cable