DPA d:facto 4018V-B-B01

Properties:

The d:facto™ 4018V-B-B-B01 is a vocal microphone with supercardioid characteristic. The 4018V linear microphone capsule combines the advantages of a cardioid and a supercardioid characteristic and offers a high-end boost. The microphone supports a frequency response of 20 to 20,000 Hz (or 100 to 16,000 Hz) and features a third-order permanent high-pass filter at 80 Hz. The maximum sound pressure level is 160 dB.

• Exceptionally natural sound
• Perfectly uniform supercardioid directivity
• High separation
• Extreme SPL handling
• Low grip noise
• Flexible adapter system, suitable for most professional wireless systems
• Slim design

Technical Specifications:

• Acoustic Principle: Pre-polarized condenser (pressure gradient)
• Directivity: Supercardioid
• Frequency Response: 20 - 20,000 Hz, permanent third-order high-pass filter at 80 Hz
• Frequency Response (±2 dB, at 12 cm): 100 - 16,000 Hz with 3 dB soft boost at 12 kHz
• Sensitivity (nominal, ±2 dB at 1 kHz): 5 mV / Pa; -46 dB re. 1 V / Pa
• Equivalent Noise Level (A-weighted): typ. 19 dB(A) re. 20 µPa (max. 21 dB(A))
• Signal-to-Noise Ratio (A-weighted): typ. 75 dB(A), re. 1 kHz at 1 Pa (94 dB SPL)
• Total Harmonic Distortion: less than 1 % up to 139 dB SPL peak
• Dynamic Range: typ. 120 dB
• Max. Sound Pressure Level (peak before clipping): 160 dB
• Output Impedance: 100 Ohms
• Minimum Load Impedance: 1 kOhms
• Cable Drive Capability: 100 m
• Output Balance Principle: Impedance balancing with Active Drive
• Common Mode Rejection Ratio (CMRR): more than 50 dB at 1 kHz
• Connection: XLR 3-pin (male)

General Product Information:

• Dimensions Microphone (Diameter x Length): 52 x 205 mm
• Capsule Diameter: 19 mm
• Weight: 309 g
• Operating Temperature: -40° to +45° C (max. 90 % rel. air humidity)
• Operating Voltage: +48 V phantom power (±4 V)
• Max. Output Voltage (RMS): 8 V
• Power Consumption: max. 2 mA
• Color: Black

Included in Delivery:

• 1x Wired grip
• 1x Metal grid
• 1x Microphone clamp