DPA d:facto 4018V-B-SE2

Properties:

The d:facto™ 4018V-B-SE2 is a microphone capsule with supercardioid characteristics, metal grid and wireless adapter, which has been specially adapted for the Sennheiser 2000, 6000, 9000, D1 and Evolution handheld transmitters. The 4018V linear microphone capsule combines the advantages of cardioid and supercardioid characteristics and offers a high-end boost. The capsule supports a frequency response of 20 to 20,000 Hz (or 100 to 16,000 Hz) and features a third-order permanent high-pass filter at 80 Hz. The maximum sound pressure level is 160 dB.

• Exceptionally natural sound
• Perfectly uniform supercardioid directivity
• High separation
• Extreme SPL handling
• Low grip noise
• Flexible adapter system, suitable for most professional wireless systems
• Slim design

Technical Specifications:

• Acoustic Principle: Pre-polarized condenser (pressure gradient)
• Directivity: Supercardioid
• Frequency Response: 20 - 20,000 Hz, permanent third-order high-pass filter at 80 Hz
• Frequency Response (±2 dB, at 12 cm): 100 - 16,000 Hz with 3 dB soft boost at 12 kHz
• Sensitivity (nominal, ±2 dB at 1 kHz): 5 mV / Pa; -46 dB re. 1 V / Pa
• Equivalent Noise Level (A-weighted): typ. 19 dB(A) re. 20 µPa (max. 21 dB(A))
• Signal-to-Noise Ratio (A-weighted): typ. 75 dB(A), re. 1 kHz at 1 Pa (94 dB SPL)
• Total Harmonic Distortion: less than 1 % up to 139 dB SPL peak
• Dynamic Range: typ. 120 dB
• Max. Sound Pressure Level (peak before clipping): 160 dB
• Output Impedance: 100 Ohms
• Minimum Load Impedance: 1 kOhms
• Cable Drive Capability: 100 m
• Output Balance Principle: Impedance balancing with Active Drive
• Common Mode Rejection Ratio (CMRR): more than 50 dB at 1 kHz

General Product Information:

• Capsule Diameter: 19 mm
• Operating Temperature: -40° to +45° C (max. 90 % rel. air humidity)
• Operating Voltage: +48 V phantom power (±4 V)
• Max. Output Voltage (RMS): 8 V
• Power Consumption: max. 2 mA
• Color: Black

Included in Delivery:

• 1x Wireless adapter SE2
• 1x Metal grid